4 Methods For Crane Maintenance
March 28, 2022
First, since the crane maintenance is a special vehicle, the operator should receive training and guidance, have a full understanding of the structure and performance of the machine, and obtain certain operational and maintenance experience before operating the machine. The product maintenance and repair instructions provided by the manufacturer are the necessary information for the operator to operate the equipment. Before operating the machine, be sure to read the maintenance instructions and operate and maintain according to the requirements of the manual.
The second point, pay attention to the workload of the crane maintenance and running-in period, the working load during the running-in period should generally not exceed 80% of the rated working load, and should arrange the appropriate workload to prevent the overheating caused by the continuous operation of the machine for a long time. occur.
Third, pay attention to the maintenance and repair of the crane. Observe the indications of each instrument. If an abnormality occurs, stop it in time to eliminate it. If the cause is not found, the operation should be stopped before the fault is eliminated.
Fourth, pay attention to crane maintenance and often check the lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) position and quality, and pay attention to check the sealing of the machine. During the inspection, it was found that the oil and water were too much, and the reason should be analyzed. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended that the lubrication point be filled with grease for each shift during the running-in period (except for special requirements).
